LTO machine Vallox 125E MV RA12 [7912191]

• Brand: Vallox
• Product number: LVI-7912191
• Delivery time: approx. 1-5 business days.
• shipping cost: €9.90 or
• Free pickup, no hidden costs

Fits directly into the duct outlets of Vallox 75/95 units.

With the different models of Vallox 125 MV, you can replace dozens of old ventilation unit models easily and quickly. With the help of an automated ventilation unit, you can effortlessly implement energy-efficient ventilation in your home with modern features.

The unit models (AG) differ only in terms of duct outlets and are suitable for replacing the old unit directly or with only minor duct modifications. This makes ventilation renovation easier and saves costs. The Vallox 125B MV ventilation unit can be used to directly replace (duct outlets in the same locations) Ilmava Digit and Ilmava 130. See the unit's replacement table for more detailed information.

A modern ventilation system takes care of the indoor air in living spaces automatically using built-in humidity and carbon dioxide sensors. The unit continuously brings clean, filtered air at the desired temperature into the space and increases ventilation as needed. High-quality, energy-efficient ventilation increases living comfort, promotes the health of residents and brings financial savings. Vallox 125 MV perfectly meets the requirements of modern ventilation.

The heat recovery efficiency of the ventilation unit is excellent, almost 80%. The efficiency shows how effectively the unit utilizes the heat from the exhaust air to heat the supply air. Efficient heat recovery keeps the energy consumption of the ventilation low even at higher operating capacities, and separate preheating is no longer required.

The electricity consumption of the Vallox 125 MV fans is quite low with current EC motors, and thanks to the advanced automatic defrosting, the machine does not turn off the supply fan even in severe frosts. Larger, high-quality filters effectively protect indoor air from outdoor pollutants.

The ventilation unit has versatile control options and can be registered with the free MyVallox Cloud service. The unit can be controlled remotely via the cloud service. The unit can also be connected to a home automation system.
Accessories included in the delivery: MyVallox Touch controller, Vallox SilentKlick water trap, wall mounting plate.
Check the replacement table to see if this model is suitable for replacing your old ventilation unit.

- duct outlets 4 x 125 mm
- max. exhaust air 125 l/s @ 100 Pa
- max. supply air 115 l/s @ 100 Pa
- cross-countercurrent cell, efficiency > 80 %
- specific energy consumption class (SEC) in cold/average climate: A+/A
- automatic, partial bypass of heat recovery with cooling recovery
- Vallox on-demand defrosting system
- automatic boost, internal humidity and carbon dioxide sensor
- possibility to control remotely via the network by connecting the machine to the MyVallox Cloud service or the MyVallox Home home network
- fireplace switch function
- supply air filtration ISO Coarse > 75% + ISO ePM1
- exhaust air filtration ISO Coarse > 75%
- electric post-heating resistor 900 W
- additional electric heating element 900 W
- Modbus and KNX connection ready
- safety switch cuts off power when the door is opened
- water trap Vallox Silent Klick included in the price
- controller included in the price

Brand: Vallox
Width: 598mm
Height: 525mm
Depth: 601 mm
Voltage: 230
Weight: 65.5
Protection class (IP): IP34
Heat recovery method: other
Bypass: yes
: 0.34
Nominal diameter of the channel: 125
Maximum air volume, 100 Pa: 399
Maximum air volume, 50 Pa: 281
Frequency: 50
Number of stages: 1
Electric heating element power: 900
Reversible right/left version: no
Suitable for (extra) carbon dioxide sensor (CO"): yes
Housing/cover material: steel
Electrical connection: connection cable with RA plug
With heat protection: yes
With continuous pressure control: no
Heat exchanger material: aluminum
: yes
Supply air filter according to ISO 16890-1: 2016: ISO ePM1
Wired control unit: yes
Suitable for (extra) humidity sensor (RH): yes
Internal humidity sensor (RH): yes
Internal carbon dioxide sensor (CO2): yes
Motor type: electronically commutated (EC)
: no
With constant volume flow control: no
Wall mounting: yes
Digital display: yes
: A
Supports Modbus protocol: yes
Suitable for wired control unit: yes
Heating element: yes