Charging station Basics Schneider Charge Pro 22 Kw T2S Mid [3505095]

Schneider Charge Pro is a wall-mounted charging station for all electric vehicles according to IEC61851-1. It can be installed both indoors and outdoors and also on a stand. The IP protection class is IP55. The impact resistance class is IK10. The operating temperature is -30 °C to 50 °C. The charging station has a T2S socket, which is on the front. The rated output power depends on how the product is installed. It is 7.4 kW when supplied in single phase and the rated charging current is 32 A under 230 V (220 V - 240 V) at 50/60 Hz. It is also 11 kW or 22 kW in three phase when supplied with a rated charging current of 16 A or 32 A at 400 V (380 V - 415 V) at 50/60 Hz. It can be used in TN-S, TN-C, TT or IT 230 earthing systems. The charging station is easy to install and commission. It is recommended for both housing associations and leasing car owners. The dimensions are (W) 292 mm x (H) 418 mm x (D) 136 mm. Its product weight is 3 kg. Its color is black (RAL 9005). It includes a built-in direct current detection 6 mA (RDC-DD). The device also has a MID electricity meter, a Wi-Fi module and 2 Ethernet ports. During commissioning, the eSetup app can be used to specify that there is no user identification or that identification is done with an RFID tag to start charging. The white side button activates the Wi-Fi Direct connection, which is then used to connect to the eSetup app for commissioning. The charging station has an LED light that changes color between red, green, blue, white and orange to indicate the status of the charging station. The charging station can communicate with the Linky Smart Meter electricity meter using the TIC protocol. (France only) This allows the maximum power allocated to the electric vehicle to be adjusted in real time according to the consumption of other loads in the house and to adapt the load according to the information sent by the TIC. The OCPP 1.6J communication protocol can be used to connect to the charging operator's monitoring/third-party cloud. It can also be connected to the home internet router either via Wi-Fi or an RJ45 Ethernet cable.