Water heater Metromini 11 Nibe instantaneous water heater 2117111602 [5273257]

• Brand: Metro
• Product number: 5273257
• Delivery time: approx. 1-10 business days.
• Delivery fee: €9.90 or
• Free pickup, no hidden costs.
  
  

More information :

The METROMINI 11 instantaneous water heater is a pressure-resistant water heater intended for decentralized water distribution using a water connection. METROMINI heats water as it is used. The heater does not have a tank, making it an energy-efficient model. The heater is designed to be installed under a sink, and it must be installed with the water connection upwards. The instantaneous water heater provides hot water for, for example, cottages, warehouses, production facilities, pumping stations and garages.

The electrical control allows you to regulate the energy consumption depending on the selected outlet temperature, the corresponding inlet temperature and the flow. The outlet temperature of the hot water is therefore the desired temperature and the temperature remains constant at all times, even when the pressure changes. The desired outlet temperature can be adjusted between 30-60 °C using a potentiometer located inside the water heater. The outlet temperature of the water is set at 50 °C at the factory. The instantaneous water heater switches on immediately when the hot water tap is opened and switches off automatically when the tap is closed.
An electric instantaneous water heater is selected according to the desired flow rate and final temperature; the higher the flow rate, the lower the final temperature. The power is equal to the amount of hot water, so always check the fuse panel to see what size heater you can choose. Note! Heaters always require a safety valve, which is not included in the delivery. Take into account the effect of the inlet water temperature.
Brand: Metro
Product number: LVI-5273257
Height: 330.0 mm
Depth: 108.0 mm
Width: 117.0 mm
Volume: 0.3 liters
Power: 11000W
Voltage: 400V
Protection class IP: 24
Supply voltage: 3 x F/J ~ 3 x 400 V
Design pressure: 10 bar
Fuse size: 3 x 16
Hot water temperature adjustment range: +30...+60 °C, adjustment inside the unit
Maximum incoming water temperature: 60 °C
Flow rate required for operation: 2.0 l/min
Water pressure: 0.2-0.4 MPa, never more than 1 MPa
Pressure loss at flow rate 2.5 l/min/9.0 l/min: 0.2 bar
Required wire size: 3 x 1.5 mm²
Weight: 1.9 kg
Temperature increase by flow:
Max. 2.5 l/min: 60 °C
Max. 3 l/min: 53 °C
Max. 3.5 l/min: 45 °C
Max. 4.8 l/min: 33 °C
SAP AMM754
HVAC 5273257
PLC 5273257
EAN/GTIN 5708512054409
Manufacturer's product code 2117111602
Supplier product code 2117111602