Replacement air valve Fresh TL80C-dBs [8823779]

The TL80C-dBs wall valve is intended for continuous ventilation. It has a through-duct that dampens external noise. The valve is adjusted with a control lever under the cover. Thanks to the design of the valve, the incoming air is distributed only upwards and to the sides. The rapid mixing of the air with the warm air at the ceiling edge significantly reduces the feeling of draft, as long as the valve is installed correctly. Also suitable for underfloor heating. The valve is adjusted with a control lever under the cover.
The sales package includes a valve section with a standard filter, condensation insulation and storm protection, as well as a sound-absorbing lead-in pipe and an external grille.
The filter is located in a filter cartridge, which makes changing the filter clean and easy. The filter cartridge also has a storm cover.
The length of the sound-absorbing dB duct is 360 mm, the diameter (inner/outer) is 81/124 mm. The duct can be easily shortened by cutting. However, shortening will reduce the attenuation properties.
The external dimensions of the valve cover are: height 186 mm, width 176 mm and depth 56 mm. The inner surface of the cover has an effective condensation insulation.
A storm shelter reduces the entry of strong winds and saves heating energy at the same time.
Installation: The TL80C-dBs wall valve is intended for installation in bedrooms, living rooms, children's rooms and offices. The recommended location is as high on the wall as possible - and if there is a radiator in the apartment, preferably above the radiator. This will achieve the most comfortable air flow into the room. Since the incoming air is mainly directed upwards, the cold outside air has already reached a comfortable temperature very close to the valve.
Maintenance: To ensure good air quality and air flow, the filter should be cleaned/replaced 1-2 times a year. The filter is located in a filter cassette, which can be found behind the valve cover at the mouth of the duct. The filter basket can be removed by gently pulling it out of the valve body. The standard filter can be washed with lukewarm water. The pollen filter and FlimmerFilter power filter should always be replaced with a new one.