Energy meter Din Dsz15D-3X80A [6712632]

Three-phase energy meter, direct measurement. The LCD display shows the tariff-specific total energy consumption T1 and T2 (kWh), the total consumption (kWh) stored in the resettable RS1 and RS2 memory, the instantaneous power consumption P (kW), the instantaneous voltage U (V) and the instantaneous current I (A) per phase.

Maximum current 3x80A.
MID approved.
4 DIN modules = width 70mm, depth 58mm.
Standby consumption only 0.5 W/wire.
Accuracy class B (1%).
With S0 interface.
A direct-measuring three-phase current meter measures active energy based on the electrical currents flowing between inputs and outputs.
The device's own consumption, which is only 0.5 watts at most, or the active power, which is 0.5 watts per wire, is not taken into account in the measurements and is not shown on the display.
1-, 2- or 3-phase conductors with a maximum current of 80A can be connected to the meter.
The starting current is 40mA.
The N connector must always be connected.
The 7-segment LCD display can also be read without power supply twice within two weeks.
The power consumption is indicated by a bar on the display that flashes at a rate of 100 times/kWh.
Designed to be used as a standard dual-tariff meter: Switch to another tariff by connecting 230V to terminals E1/E2.
On the right side of the screen are the MODE and SELECT buttons, press them to scroll through the menu according to the user manual.
First, the backlight turns on, then the display can display the total electricity consumption per tariff, the consumption stored in the resettable RS1 or RS2 memory, the value at the time of reading, the voltage and current per phase.
Error message (false): when a phase conductor is missing or the current direction is incorrect, a symbol appears on the display at the 'false' position and at the relevant phase conductor on the right edge of the display.