Energy meter Din Wsz15De-32A [6712631]

Single-phase energy meter, direct measurement. The device's LCD display alternates between total energy consumption (kWh) and instantaneous power consumption (W).

Maximum current 32A.
1 DIN module = width 18mm, depth 58mm.
No MID approval.
Accuracy class B (1%).
With S0 interface.
The display can only be read when the power is on, however the consumption is stored in non-volatile memory and is displayed immediately after power is restored.
The device display changes every 30 seconds for 5 seconds from total consumption in kWh to instantaneous consumption in watts.
Standby consumption only 0.4W.
Error message: If a connection error occurs, the display backlight will start flashing.
This AC meter measures the active energy of the electrical current flowing between the input and output.
The device's own consumption, which is only 0.4 watts at most, is not taken into account in the measurements and is not displayed.
This meter, like other meters that do not have a certificate of conformity (e.g. MID), is not suitable for billing.
A wire with a maximum current of 32A can be connected to the device.
The starting current is 20mA.
If the expected load is more than 50%, the ventilation gap should be ½ module for adjacent devices, use a DS12 spacer if necessary.
Two N connectors for safe cross-wiring of multiple meters.
The digital display has 7 digits.
Two decimal places are displayed up to 99999.99kWh, above 100000.0kWh there is only one decimal place.
The power consumption is indicated by a bar on the display that flashes at a rate of 1000 times/kWh.